ECLIPSE™ SNAP LOCK

We are Sydney's Eclipse™ Standing Seam Supply Specialist with
the best service, experience, and extensive product range.

ECLIPSE™ SNAP LOCK

No 1 Roofing & Building Supplies are the premier manufacturer and stockist of Eclipse™ Snap Lock Roofing and Cladding products,

ECLIPSE™ SNAP LOCK ROOFING & CLADDING

Eclipse™ Snap Lock is a lightweight architectural cladding system ideal for both roof and wall applications in commercial, industrial and residential environments. Its thin distinctive ribs and wide pans give it visual appeal.

Eclipse™ Snap Lock looks similar to Standing seam without the need of crimping the joints due to the “snapping” process. Available in 25mm and 38mm ribs, Snap Lock can be manufactured in various widths to suit new construction or renovation projects.

Snap Lock Technical Specification

The support needs to be ventilated, rigid and continuous where all parts of the Eclipse™ Snap Lock panels are laid. The plywood minimum thickness shall be 15mm for cladding and 18mm for roofing. Eclipse™ Snap Lock panels are laid directly over the ply substrate and held in place with a concealed clip.

Clips are fixed with countersunk screws onto the timber supports at maximum 600mm centres. Each panel has a male and female rib. The female rib is held in place by a clip.

The male rib is placed over both the clip and female rib. Material choice to be verified by client and installation must comply in accordance with the BCA.

MATERIAL AVAILABILITY

  • Colorbond

    0.55mm BMT Colorbond / Zincalume / Metallic / Ultra
  • Copper

    0.7mm BMT Copper
  • Aluminium

    0.7mm BMT Aluminium
  • Corten

    0.55mm COR-TEN
  • Zinc

    0.7mm Zintek Zinc, VMZinc, RheinZink, Jarden Zinc
SnapLock Roofing Cladding Profile

ECLIPSE™ SNAP LOCK

No.1 Architectural ECLIPSE™ SNAP LOCK Roofing & Cladding Profile

ECLIPSE™ SNAP LOCK CHARACTERISTICS

Standard Module Sizes 25 x 320mm 25 x 520mm 38 x 285mm 38 x 485mm
Rib Height 25mm 25mm 38mm 38mm
Lengths (Min - Max) 1 - 8 metres (can be longer depending on site limitations)
Application New construction or renovation
Minimum Pitch Requirement 3 degrees
  • Custom widths available upon request.
  • Dimensions are subject to -/+ 10mm tolerance.
TOP