S-5 TrapBracket 2.0

Description

Roof Profiles | Profile Examples | Installation | Brochures

The TrapBracket™ 2.0 can mount basically anything to an exposed-fastened trapezoidal composite panel roof system without having to worry about trying to fix into the supporting steel structure or penetrating the internal liner sheet.

The EPDM Insert allows the TrapBracket to be installed on other roof profiles dissimilar to that it was originally designed to fit. It is extremely economical and strong making it perfect for many applications including: HVAC / Rooftop Equipment, Walkways, Pipes, Satellite Dishes, Antennas and many more.

Suits Australian Roof Profiles:

Roof Manufacturer	Roof Profile Name
Kingspan	KS 1000 RW No Insert Required
Lysaght	Trimdek Spandek
Stramit	Monoclad
Bondor	SolarSpan®
Steeline	Steel – Clad 762
ASKIN	Metric Roofing

Seam Profile Examples:

Installation:

The only surface preparation necessary is to simply wipe away excess oil and debris. Determine the location of assembly.

Secure the TrapBracket directly into the crown of the roof profile by driving the appropriate fasteners into the four pre-punched holes, or pre-drilling the proper sized hole through the four pre-punched holes and riveting with bulb-type rivets.

To achieve tested holding strength, secure the TrapBracket by using all four pre-punched hole locations. Drive the fastener in until it is tight and the washer is firmly seated.

Do not overdrive fasteners; a slight extrusion of rubber around the washer is a good visual tightness check. If a fastener has been overdriven, it is important to remove the fastener and replace it with a bulb rivet.

To avoid stripping the fastener, do not over torque; use screw gun. The TrapBracket is now ready to install other ancillaries, such as the S-5-PV Kit, using the top M8 hole.

Brochures: