S-5 K 700 Clamps

Description

  Roof Profiles   |  Profile Examples |   Installation    |   Brochures

The S-5-K700 clamp was designed with S-5! zero penetration technology for application needs with the very distinctive roof profiles of Stramit Speed Deck Ultra, Lysaght Klip-Lok 700 Hi-Strength, Fielders KingKlip 700 and roofing types with similar profiles.

The S-5-K700 clamp is the perfect zero penetration rooftop attachment solution for these distinctive standing seam metal roof profiles. For load critical applications such as attaching solar panels, the assembly should be specifically engineered to each individual project to ensure maximum hold.

Suits Australian Roof Profiles:

Example Roof Profile:

Installation:

Mate the clamp halves and start the M8 bolt. Thread bolt until the end of the bolt is just flush with the outside face of the flanged side.

Place clamp assembly over the seam and force down until clamp snaps over seam. Position clamp appropriately on seam, then close clamp using a locking C-Clamp.

Using a hand ratchet or electric tool (13mm), tighten M8 bolt until clamp is fully closed, then verify bolt tension to 160 inch pounds (13 foot pounds).

Remove locking C-Clamp. Consult the S-5! website at www.S-5.com for published data regarding holding strength.

Brochures:

• S-5-K 700 Brochure
• S-5-K 700 Installation