The S-5!® CorruBracket 500T Mini is the perfect way to attach almost anything to 16–18 mm corrugated roofing, including PV via rail or DirectAttached™ methods. Designed specifically for the Australian, Asian and African markets.
It is affixed to the crest of the corrugation, leaving the drainage plane free of holes to protect against leaks. For medium-duty applications, the bracket can be attached directly to the sheeting, accommodating ancillary attachment anywhere along the corrugation.
For heavy‑duty applications, the bracket can be fixed into the underlying substrate for additional support without crushing the corrugation.
CorruBracket 500T Mini is mounted directly onto the crown of the panel, straddling the valley. No surface preparation is necessary; simply wipe away excess oil and debris, align and apply.
Secure directly into the crown of the roof profile by driving the appropriate screws into the six pre-punched holes, or pre-drilling the proper sized hole through the six pre-punched holes and riveting.
Having no messy sealants to apply, CorruBracket 500T Mini comes with a factory-applied EPDM rubber gasket seal already on the base, and the S-5!- reservoir conceals the EPDM from UV exposure, preventing drying and cracks.
To ensure brackets are installed in a straight line, install a single CorruBracket 500T Mini on each end of the roof at a measured, consistent distance from the bottom edge of the roof. Use a string line between the two brackets.
Mount the remaining CorruBracket 500T Mini along the string line, directly into the roof. Do not remove the EPDM rubber gasket as this is for water-tightness weather-proofing.
(shown below is CorruBracket 500T Mini Installation Guide)