AIR CON / HVAC ROOF BRACKETS

Mounting an HVAC unit with metal roof brackets to your roof can pose lots of challenges; lining up screw holes on heavy units, adjusting levels, making sure all penetrations are weatherproof and so on.

The GRipperFix and S-5 clamp system makes it all so easy. Simply identify the appropriate roofing profile here.

If you need to direct fix the GRipperFix rails to the roof then you can bypass this step.

Position and attach the downslope clamps first then the upper clamps. The sliding tabs make attaching the GRipperFix rails very simple whether you’re using S-5 clamps or direct fixing.

You can add vibration reduction and levelling pads to raise the lower strut on sloping roofs to ensure the HVAC unit is level. Once everything is nicely lined up final tightening of the screws will ensure your HVAC unit stays where it’s meant to be.

GRIPPER FIX SYSTEM®

Overview:

The S-5 GRIPPERFIX system, with S-5! clamps and brackets are The Right Way™ to mount to any metal roof using with lifetime “double-seal” performance – or no roof penetration at all.

GRIPPERFIX is quick & simple to install, preserves warranties and lasts the as long as the roof itself. Can be installed Exposed or Concealed Fix System.

Benefits:

  • Eliminates corrosion, rust, algae
  • All aluminum & stainless
  • AND- lower cost than the wrong way!

Overview:

The S-5-S clamp was created specifically for popular snap-together profiles - including residential profiles by Taylor Metals and Easy Lock Standing Seam.

For horizontal seams under .540 inches (like the Firestone UC4) the S-5-S or S-5-S Mini clamp can be used to avoid the necessity of crimping the seam.

Benefits:

  • Easy Installation
  • Holds Strong Loads
  • 25 Year Manufacturer's Limited Warranty

Installation:

Installation is as simple as placing the clamp on the seam and tightening the round-point setscrew to the specified tension.

Then, affix ancillary items using the bolt provided.

Overview:

The S-5-S Mini is a medium-duty, non-penetrating seam clamp. It is a bit shorter than the S-5-S and has one setscrew rather than two.

The Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays and many more uses.

Benefits:

  • Easy Installation
  • Wide Range of Uses
  • Holds Strong Loads
  • 25 Year Manufacturer's Limited Warranty

Installation:

Installation is as simple as placing the clamp on the seam and tightening the round-point setscrew to the specified tension.

Then, affix ancillary items using the bolt provided.

TOP