INTERLOCKING PANEL

We are Sydney's Standing Seam Supply Specialist with
the best service, professional advice and product range.

INTERLOCKING PANELS

No 1 Roofing & Building Supplies are the premier manufacturer and stockist of Interlocking Panel wall cladding products,

No.1 ARCHITECTURAL INTERLOCKING PANEL - WALL CLADDING

Interlocking panel is a contemporary looking wall cladding system installed with a ventilated air gap for external and internal applications.

The panels are connected by an interlocking groove giving it an elegant appearance of a recessed joint. The reveal panel can range from 200mm to 300mm in width and lengths up to 6.0 m

Interlocking Panel Specifications Detail

 

Interlocking panels are laid and fixed down on the grooved flange using concealed fasteners directly onto the batten. The panels are connected by inserting the male flange into the groove. The load bearing main structure can be a concrete wall, masonary wall or steel.

The batten can be either timber or metal. The battens shall be placed at right angles to the panels. The panels can be laid horizontally, vertically or diagonally. In the case of non vertical walls, a waterproof membrane must be installed behind the ventilation gap.

Material choice to be verified by client and installation must be in accordance with the BCA

MATERIAL AVAILABILITY

  • Colorbond

    0.55mm BMT COLORBOND® / COLORBOND® Ultra / COLORBOND® Metallic / COLORBOND® Matt and ZINCALUME® Steel
  • Copper

    0.7mm BMT Copper
  • Aluminium

    0.7mm BMT Aluminium
  • Corten

    0.55 Cor-Ten
  • Zinc

    VM Zinc, Rhine Zinc, Jarden Zinc (1.0 mm BMT)
Interlocking Panel Specifications Detail

SNAP LOCK

No.1 Architectural INTERLOCKING PANEL Wall Cladding Profile

INTERLOCKING PANEL CHARACTERISTICS

Standard Module Sizes 25 x 200mm 25 x 250mm 25 x 300mm
Maximum Batten Spans 800mm 700mm 600mm
Rib Height 25mm 25mm 25mm
Lengths (Min - Max) 0.5m to 6.0m (4m recommended)
Application New construction or renovation on vertical walls
Minimum Pitch Requirement 0mm to 25mm
  • Custom widths available upon request.
  • Dimensions are subject to -/+ 10mm tolerance.
TOP